Tuesday, January 27, 2009

How'd They Do That Tuesday: The Camera


Cameras are to the nineteenth and twentieth centuries what Gutenberg's printing press was to the fifteenth century. Both have completely revolutionized how information is conveyed. Cameras have captured everything from the battlefields of the civil war to the first moon landing into our homes and more. The first cameras over 180 years ago were not more than wooden boxes with a flap to let light in, but today cameras can capture images on film or digitally, still images or moving, microscopic or interstellar, at nearly any wavelength of light. However almost all cameras work using the same basic principles that they've been using since they were invented. Nearly all cameras share several similar components, a lens, a shutter, and recording surface, and they use these parts along with the physics of optics, to capture an image.


When you point the camera at a friend on vacation or a stunning landscape, the light reflected off of the subject will be collected by the lens. The lens is nothing more than a finely polished piece of glass that bends light so it all converges on a single focal point. Light travels slower through glass (or whatever medium the lens is made of, sometimes plastic) so when one side of a light ray hits the lens, part of it slows down and the ray bends. Think of it like a car. If the wheels on one side of the car turn slower than the other side, the car turns towards the slower wheels. When one side of a light ray travels faster than the other, the light will bend towards the slower side.

The image is captured on the recording surface where the light rays converge at the focal point. The recording surface is usually a film coated with light sensitive silver halide crystals, or in a digital camera, a charge-coupled device. If the film isn't right at the focal point, the image will appear out of focus and blurry.

The lens will actually flip the object's image onto the film. Because of the angle the light hits the glass, rays from the object that hit the edge of the lens bends more sharply than light that hits around the center. The light then converges on the film on the far side from where it started. Where the focal point falls is a property of both the curvature of the lens and how far away the object is. When you twist the focus on a camera, it moves the lens and the focal point closer or farther away from the film so you can focus on objects different distances away.

The shutter and aperture both regulate how much light is allowed into the camera. The aperture acts much like the iris in your eye, opening wide to let more light in, or narrowing to restrict the flow. This allows the photographer to make sure that the right amount of light gets through for the picture to come out. The shutter is essentially the small door in the camera that exposes the film, very briefly, to the focused light so it can capture the image. The longer it's opened the more light gets through. So much of the art of photography is finding the right balance between the shutter speed and aperture size to perfectly capture the subject.

5 comments:

  1. This is my favorite!

    ReplyDelete
  2. Thanks a lot ,you helped me understanding the idea in a simple way !

    ReplyDelete
  3. Thankyou, very easy to understand

    ReplyDelete